Tips for house stain or deck application:

APPLICATION House Stain or Deck Stain TECHNIQUES:

• Remember that Men-Wood™ products should be applied with a wet on wet application using sufficient material so that the surface remains wet for only a short time before penetration into the substrate. Surface residues, pools and puddles of applied Men-Wood™ should be removed by backrolling or brushing until the Men-Wood™ completely covers the surface. Failure to do so may result in blotching and/or a glistening appearance.
• When spraying, be sure to mask off glass, plastic, and metal. Protect plants, grass and other materials by shielding or covering.
• Clean Up: Men-Wood™ cleans up easily with paint thinner or mineral spirits. CAUTION: PROPERLY DISPOSE OF RAGS SATURATED WITH FINISH AS THEY ARE SUSCEPTIBLE TO SPONTANEOUS IGNITION. (Dispose of rags in a water-filled container).
• DO NOT APPLY ON DIRTY, WET OR GLAZED SURFACES!!!
• First apply ULTRA-KLEEN with a garden sprayer type applicator for removal of dirt, oil, mill glaze, etc. from the surface. Let the solution work for 15 to 20 minutes. Power wash thoroughly with clean water and allow to dry. Dark stains will have to be removed by using ULTRA-KLEEN. After applying, use a stiff bristle brush to clean the area and power wash down. Allow to dry 48 hours without rainfall. This process will clean the substrate, open the wood pores, and ensure good adhesion. Use power washer at 500psi to start. Increase psi as needed for additional cleaning action on substrate. 
• If logs are green, have been dip treated with any Timbor or CCA, or have a moisture content in excess of 18%, use Log Keeper!! A drying period of six months is required before finishing with Men-Wood™.
• After cleaning use our PREMIUM GRADE CAULKING, Log Builder, or Conceal. CAULKING MUST BE APPLIED BEFORE COATING WITH Men-Wood™. This should be applied to all cracks more than 1/16 " wide. 
• Before applying Men-Wood™ to treated wood, be sure that the wood has aged for a period of 60 to 90 days. Be particularly cautious when working with cedar, pine, redwood or mahogany-as these woods may take 6 months to dry suitably. MOISTURE CONTENT MUST BE 18% BEFORE APPLYING Men-Wood™ TO ANY SUBSTRATE!! You must use a moisture meter with 2" probes for logs.
• You can use Men-Wood™ on horizontal surfaces-like decks and walkways. 
• Always stir and shake the container before use. This will make the color uniform. Also be sure to stir it often during use as the pigment has a tendency to settle. If more than one pail is used, BLEND from one to another to keep the color uniform. Pigment colors are NOT pre-mixed
• Reseal all partially used containers immediately and completely!! You can lay lid loose on top of the container while using the product. Make sure it is sealed airtight when done. Use a rubber mallet to secure lid if necessary. Shelf life unopened 1 to 1-1/2 years, opened 6 months to 1 year. If storing, relieve lid pressure by drilling a 1/8” hole in the center of the lid and cover with a piece of masking tape to relieve pressure buildup. If this process is not done your pail will crack open.
• Do not add solvents, catalysts, curing agents, or any other material to Men-Wood™. NEVER THIN Men-Wood™!!!
• Insecticide can be added if you live in high bug infested areas like the Midwest & Southeastern USA. 
• Do not apply Men-Wood™ during inclement weather or when the ambient temperature is above 95 degrees. For best results, apply at temperatures above 45 degrees. Avoid frost, fog, and extreme damp conditions. 
• DO NOT USE over a solid colored stain, latex stain or paint. Men-Wood™ can be used if old stains and paints are stripped clean. 
• Men-Wood™ can take 36 hours to set up an initial water barrier. For best results do not subject Men-Wood™ to rain or high water pressure during this time. 
• To prevent lap marks, avoid application in direct sunlight or on a hot moist surface.
• If storing, relieve lid pressure by drilling a 1/8” hole in the center of the lid and cover with a piece of masking tape to relieve pressure. If this process is not done your pail will crack open.

1-800-972-7693