Home Page » Tools » Tenon Cutters & Forstner Bits » Single BladeTenon Cutter 5/8"
Cart Items: 0   Total: $0.00  
 
Search Site
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Single BladeTenon Cutter 5/8
Qty:
Add to Wish List
 
HACKER SAFE certified sites prevent over 99.9% of hacker crime.
Single BladeTenon Cutter 5/8"
Item Number: Tenon5/8
Our Price: $108.95

Product Description
These revolutionary Tenon cutters have radiused shoulders giving you perfectly smooth tenons every time. Available in 5 cutting diameters: 5/8'. 3/4' 1', 1-1/2', 2', each one features a built-in level and is designed to run vibration-free on most electric drills or with a hand bit brace. The body has a built-in honing guide for easy sharpening of blades on a drill press mounted drum sander. All sizes have hex shanks: sizes 5/8" to 1" are for use in an electric drill with a 3/8" (or larger) chuck, while sizes 1-1/2" and 2", which require more torque to drive, are for use in larger electric drills with a 1/2" (or larger) chuck. (Not for use in a drill press.)

Setting the Tenon Length: A tenon cut to full depth will be 2-3/4" long with the 5/8" to 1" dia. tenon cutters, and 4-1/4" long with the 1-1/4" to 2" dia. tenon cutters. (NOTE: tenon lengths do not include the 3/4" long shoulder). Tenon length can be reduced by making a depth stop using the rare-earth magnet that comes attached to the back end of the nex drive. With the blade advanced to cut the minimum tenon size, cut a full-length tenon. cut off the end of this tenon to obtain a dowel of the required length; dowel length = (tenon length without depth stop) - desired tenon length. Counterbore a hole in the center of one end, only deep enough to house the magnet. Bond the magnet into the hole using epoxy adhesive. Pop the magnetic depth stop into the tenon cutter until it adheres to the bottom of the bore. Stab it with a scratch awl to remove it. Not available in sets